GZCLP

By Tally · Based on GZCLP by Cody Lefever

Written in our own words from the author's public post. Not affiliated with or endorsed by the author.

Three days a week of squat, bench press, deadlift and overhead press for new lifters.

3 days a week · beginner · about 60 min

Run in Tally

New to Tally? Install it from the App Store or Google Play, then tap Run in Tally again.

QR code that opens this program in Tally. Scan it with your phone's camera.

Scan with your phone

New to Tally? Get it on the App Store or Google Play, then scan the code.

GZCLP

By Tally · Based on GZCLP by Cody Lefever

Training days: 1, 3 and 5 each week.

Day 1 · about 60 min

A1 · Squat

  • Barbell Squat5 × 3+
  • Barbell Bench Press3 × 10
  • Lat Pulldown3 × 15+
Run in Tally

You need

  • Barbell and plates
  • Squat rack
  • Bench
  • Cable machine
  • Dumbbells

No cable machine or dumbbells? Turn them off when you start. Tally swaps those exercises.

About this program

GZCLP is a beginner strength program. You train 3 days a week. Each workout has one heavy lift, one lighter lift for more reps, and one high-rep back exercise. You add weight every time a lift comes up, until you miss. You need a barbell, a rack and a bench. A cable machine and dumbbells help, and you can swap them out.

The weeks

Day 1 is the day you start. After week 4, the program starts again at week 1. A + after the reps means the last set can go past that number. The exercise note says when to stop.

Week 1

Day 1

A1 · Squat

  • Barbell SquatTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Barbell Bench PressTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • Lat PulldownTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+

Day 3

B1 · Overhead Press

  • Overhead PressTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Barbell DeadliftTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • One-Arm Dumbbell RowTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+each side

Day 5

A2 · Bench Press

  • Barbell Bench PressTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Barbell SquatTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • Lat PulldownTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+

Week 2

Day 1

B2 · Deadlift

  • Barbell DeadliftTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Overhead PressTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • One-Arm Dumbbell RowTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+each side

Day 3

A1 · Squat

  • Barbell SquatTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Barbell Bench PressTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • Lat PulldownTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+

Day 5

B1 · Overhead Press

  • Overhead PressTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Barbell DeadliftTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • One-Arm Dumbbell RowTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+each side

Week 3

Day 1

A2 · Bench Press

  • Barbell Bench PressTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Barbell SquatTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • Lat PulldownTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+

Day 3

B2 · Deadlift

  • Barbell DeadliftTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Overhead PressTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • One-Arm Dumbbell RowTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+each side

Day 5

A1 · Squat

  • Barbell SquatTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Barbell Bench PressTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • Lat PulldownTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+

Week 4

Day 1

B1 · Overhead Press

  • Overhead PressTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Barbell DeadliftTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • One-Arm Dumbbell RowTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+each side

Day 3

A2 · Bench Press

  • Barbell Bench PressTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Barbell SquatTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • Lat PulldownTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+

Day 5

B2 · Deadlift

  • Barbell DeadliftTier 1. Last set: as many clean reps as you can. Stop 1 or 2 reps before failure. Rest 3 to 5 min.
    5 × 3+
  • Overhead PressTier 2. Same weight for all 3 sets. Rest 2 to 3 min.
    3 × 10
  • One-Arm Dumbbell RowTier 3. Last set: as many reps as you can. Stop 1 or 2 reps before failure. At 25 reps, add weight next time. Rest 60 to 90 s.
    3 × 15+each side

How to run it

The goal

Build strength on the squat, bench press, deadlift and overhead press. Tier 1 is the heavy lift of the day. Tier 2 is a lighter lift for more reps. Tier 3 is a high-rep back exercise.

Where to start

Start light. Use your last working weights from another beginner program. If you are new to lifting, start with the empty bar.

How to progress

Tier 1 (5 sets of 3): each time the lift comes up as tier 1, add weight if you got all 15 reps. Add 5 lb (2.5 kg) to bench press and overhead press. Add 10 lb (5 kg) to squat and deadlift. When you miss 15 reps, keep the weight and do 6 sets of 2. When you miss there, do 10 sets of 1. When you miss there, rest 2 to 3 days, find a new best set of 5, and restart 5 sets of 3 at about 85% of it. Tier 2 (3 sets of 10): add weight each time if you got all 30 reps. When you miss, do 3 sets of 8, then 3 sets of 6. After you miss at 3 sets of 6, go back to 3 sets of 10 with a little more weight than your last start, at most 20 lb (9 kg) more. Tier 3 (3 sets of 15): when the last set reaches 25 reps, add weight next time, or use a stronger band. Do not add weight from set to set.

Your week

Train 3 days a week with a rest day between workouts. The four workouts rotate, so each week starts with a different one. If you miss a day, do that workout next and move the others back.

Swaps

No cable machine: do band pulldowns or pull-ups. No dumbbells: do barbell rows. Any row or pulldown can be the tier 3 exercise. Keep squat, bench press, deadlift and overhead press as the tier 1 and tier 2 lifts.

Take care

Stop open sets 1 or 2 reps before failure. Do not grind out slow reps. If a lift causes pain, stop that lift for the day. This is not medical advice.

Works with your agent

Recommended: connect an agent and it adapts the weights and progressions to what you actually lifted. Without one, the program keeps running as written.

Connect an agent
Get this program as a file (JSON)

gzclp.json · Version 1